Room-climate display

Assembled in a printed enclosure, USB-C powered, delivered to Germany. Change parts

Parts

Arduino Nano ESP32ABX00083
Arduino Nano Connector CarrierASX00061
Cables, standoffs, M3 screws
BME280 temperature, humidity and pressure sensorAdafruit 2652
1.3" OLED display, 128×64, monochromeAdafruit 938
PIR motion sensorSeeed Grove PIR Motion Sensor

Price

Parts	€78.67
Enclosure	€24.00
Assembly and test	€34.00
Shipping	€6.00
Protoship fee	€21.40
VAT 19 %	€31.17
Estimated total	€195.24

Estimated from list prices. The final total is confirmed before you order; a reservation never obliges you to buy. About 8 to 12 working days after the order.

Reserve it

ESPHome starter config

esphome:
  name: protoship-device
esp32:
  board: arduino_nano_esp32
  framework:
    type: esp-idf
logger:
api:
  encryption:
    key: !secret api_key
ota:
  - platform: esphome
    encryption:
      key: !secret ota_key
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap: {}  # fallback hotspot if Wi-Fi fails
captive_portal:
i2c:  # Qwiic plug of the carrier
  sda: GPIO11
  scl: GPIO12
sensor:
  - platform: bme280_i2c
    address: 0x77
    temperature:
      name: Temperature
      id: temperature
    humidity:
      name: Humidity
      id: humidity
    pressure:
      name: Pressure
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO1  # Grove A0/A1
      ignore_strapping_warning: true
    name: Motion
    device_class: motion
font:
  - file: "gfonts://Roboto"
    id: font_main
    size: 14
display:
  - platform: ssd1306_i2c
    model: "SSD1306 128x64"
    address: 0x3D
    lambda: |-
      it.printf(0, 0, id(font_main), "%.1f °C", id(temperature).state);
      it.printf(0, 22, id(font_main), "%.0f %% rH", id(humidity).state);